Packaged Installation Headworks

Headworks Inlet Works

The relocation of this Wastewater Treatment Plant is a significant project that provides better protection of the environment and allows for a more robust wastewater treatment system. The plant was designed such that it can be supported on galvanised steel support beams elevated approximately 5m above ground level, to enable flows to gravitate through downstream process units.

In order to meet the requirements SPIRAC provided an inlet flow splitter where the the raw sewage passses over a fixed weir into a chamber feeding two fine screen channels. The fixed weir is high above floor level to create an inlet chamber to dissipate the energy of incoming sewage.

SPIRAC PRODUCTS USED

  1. Two DRUMGUARDsTM
  2. SPIRAC Screenings Conveyor
  3. SPIRAC Grit Vortex
  4. SANDWASHTM
  5. SPIROWASH® Compact

SPIRAC_equipment_used.jpg

 

The two drumscreen work in a duty/standby configuration to remove solids larger than 2.0 mm in two dimensions from the incoming flow and are connected  to  SPIRAC screenings conveyor system, for reliable and maintenance-free solids transport. The screenings conveyors transport screenings to the screenings washer/compactor via a drop chute. The SPIROWASH® washes out the organics from the screenings and reduces the volume and the weight of the screening and compacts them. The screenings washer/compactor wash and compact the screenings before depositing them into a combined screenings and grit bin.

Screened sewage passes from the fine screen channels to the SPIRAC GRIT VORTEX tank. SPIRAC Grit Vortex unit is designed for separating high density grit particles from lower density organics.The installed grit pump withdraws grit slurry from the grit tank and pumps it to the SANDWASHTM which washes and separates the grit, and transfers it to the combined screenings and grit bin. The SPIRAC Grit Washer makes sure that all visible organics on the grit is removed. The grit pump, grit classifier and screenings washer/compactor are installed on a concrete slab at ground level. The PTA assembly is prefabricated and transported to site in such a manner that minimises installation and requires bolted connections only.

Projected Outcomes

  • Improved quality of effluent being released to the environment.
  • Increased system capacity to cater for expected growth and development in the area.
  • The new system provides significant improvements and is more reliable.
  • New site has less impact on the Sarina township.

The new treatment plant is built to cater to a population of 7000 people. The design also allows for further expansion.

PRODUKTER

Recent News