Europe News

Rendered Content:
Rendered Content:
Rendered Content:
Rendered Content:
19/08/2019
  • Asia Pacific News
  • Europe News
  • North America News

A typical sewage treatment plant uses a range of treatment processes to produce recycled water and biosolids. In wastewater treatment, the process can be divided into four steps: pretreatment, primary, secondary and tertiary treatments.

Rendered Content:
08/08/2019
  • Asia Pacific News
  • Europe News
  • Municipal Solutions
  • North America News

This Water Treatment Plant was built in 1985 and supplies a population of around 200,000 people with drinking water. Raw water quality has deteriorated over time due to the peaty hills the water runs down before being collected in the reservoir.

Rendered Content:
31/07/2019
  • Asia Pacific News
  • Europe News
  • North America News

The goal of this project was to improve screening to help protect the pumps downstream, the project also responded to concerns raised by local residents regarding odours and noise from the existing screens, which are located outside the main pumping station building. To help address these concerns the equipment is placed in a new soundproof and odour controlled building.

Rendered Content:
Rendered Content:
Rendered Content:
27/03/2019
  • Europe News
  • Municipal Solutions

SPIRAC was asked to provide a prefabricated package treatment plant. The plant is built on a galvanised steel support structure elevated approximately 5m above ground level, to enable flows to gravitate through downstream process units. 

Rendered Content:
20/03/2019
  • Asia Pacific News
  • Europe News

When the decision was made to upgrade this Wastewater Treatment Plant, a containment and road transport solution for screenings and grit was needed. SPIRAC was asked to manufacture three 10m3 SPIROTAINER®. Two SPIROTAINER® are used for screenings and one for grit.